Examination Paper Semester I: Financial Management
IIBM Institute of Business Management
IIBM Institute of Business Management
Semester-1 Examination Paper MM.100
Financial Management
Section A: Objective Type (30 marks)
•This section consists of multiple choice & Short Notes.
•Answer all the questions.
•Part One carries 1 mark each & Part two carries 5 marks each.
Part one:
Multiple choices:
1. The approach focused mainly on the financial problems of corporate enterprise
a. Ignored non-corporate enterprise
b. Ignored working capital financing
c. External approach
d. Ignored routine problems
2. These are those shares, which can be redeemed or repaid to the holders after a lapse of the
stipulated period
a. Cumulative preference shares
b. Non-cumulative preference shares
c. Redeemable preference shares
d. Perpetual shares
3. This type of risk arise from changes in environmental regulations, zoning requirements, fees,
licenses and most frequently taxes
a. Political risk
b. Domestic risk
c. International risk
d. Industry risk
4. It is the cost of capital that is expected to raise funds to finance a capital budget or investment
proposal
a. Future cost
b. Specific cost
c. Spot cost
d. Book cost
………………………..
3. What do you understand by ‘Loan Amortization’?
4. What is the Difference between NPV and IRR?
END OF SECTION A
Examination Paper Semester I: Financial Management
IIBM Institute of Business Management
Section B: Case lets (40 marks)
•This section consists of Case lets.
•Answer all the questions.
•Each Case let carries 20 marks.
•Detailed information should form the part of your answer (Word limit 150 to 200 words).
Case let 1
This case provides the opportunity to match financing alternatives with the needs of different companies.
It allows the reader to demonstrate a familiarity with different types of securities. George Thomas was
finishing some weekend reports on a Friday afternoon in the downtown office of Wishart and Associates,
……………………………..
situation. If he could determine which firm matched each recommendation, he could still call the firms by
6:00 P.M. and meet the original deadline. George decided to return to his office and match each firm with
the appropriate financing.
Question:
1. Which type of financing is appropriate to each firm?
2. What types of securities must be issued by a firm which is on the growing stage in order to meet
the financial requirements?
Case let 2
This case has been framed in order to test the skills in evaluating a credit request and reaching a correct
decision. Perluence International is large manufacturer of petroleum and rubber-based products used in a
variety of commercial applications in the fields of transportation, electronics, and heavy manufacturing.
In the northwestern United States, many of the Perluence products are marketed by a wholly-owned
subsidiary, Bajaj Electronics Company. Operating from a headquarters and warehouse facility in San
Antonio, Strand Electronics has 950 employees and handles a volume of $85 million in sales annually.
About $6 million of the sales represents items manufactured by Perluence. Gupta is the credit manager at
Bajaj electronics. He supervises five employees who handle credit application and collections on 4,600
accounts. The accounts range in size from $120 to $85,000. The firm sells on varied terms, with 2/10, net
30 mostly. Sales fluctuate seasonally and the average collection period tends to run 40 days. Bad-debt
losses are less than 0.6 per cent of sales. Gupta is evaluating a credit application from Booth Plastics, Inc.,
a wholesale supply dealer serving the oil industry. The company was founded in 1977 by Neck A. Booth
and has grown steadily since that time. Bajaj Electronics is not selling any products to Booth Plastics and
had no previous contact with Neck Booth. Bajaj Electronics purchased goods from Perluence
International under the same terms and conditions as Perluence used when it sold to independent
customers. Although Bajaj Electronics generally followed Perluence in setting its prices, the subsidiary
operated independently and could adjust price levels to meet its own marketing strategies. The Perluence's
cost-accounting department estimated a 24 per cent markup as the average for items sold to Pucca
…………………………………were very costly to
Bajaj Electronics. With these considerations in mind, Gupta began to review the credit application for
Booth Plastics.
Question:
1. How would you judge the potential profit of Bajaj Electronics on the first year of sales to Booth
Plastics and give your views to increase the profit.
2. Suggestion regarding Credit limit. Should it be approved or not, what should be the amount of
credit limit that electronics give to Booth Plastics.
Section C: Applied Theory (30 marks)
•This section consists of applied theory questions.
•Answer all the questions.
•Each question carries 15 marks each.
•Detailed information should form the part of your answer (Word limit 200-250 words).
1. Honey Well Company is contemplating to liberalize its collection effort. Its present sales are Rs.
10 lakh, its average collection period is 30 days, its expected variable cost to sales ratio is 85 per
cent and its bad debt ratio is 5 per cent. The Company’s cost of capital is 10 per cent and tax are
is 40 per cent. He proposed liberalization in collection effort increase sales to Rs. 12 lakh
increases average collection period by 15 days, and increases the bad debt ratio to 7 percent.
Determine the change in net profit.
2. Explain the concept of working capital. What are the factors which influence the working capital?
S-1-91110
END OF SECTION B
END OF SECTION C
Examination Paper Semester I: Human Resource Management
IIBM Institute of Business Management
IIBM Institute of Business Management
Semester-1 Examination Paper MM.100
Human Resource Management
Section A: Objective Type (30 marks)
•This section consists of multiple choice & Short Notes type questions.
•Answer all the questions.
•Part one carries 1 mark each & Part two carries 5 marks each.
Part One:
Multiple choices:
1. It is a cultural attitude marked by the tendency to regard one’s own culture as superior to others
a. Geocentrism
b. Polycentrism
c. Ethnocentrism
d. Egocentrism
2. It is the systemic study of job requirements & those factors that influence the performance of
those job requirements
a. Job analysis
b. Job rotation
c. Job circulation
d. Job description
3. This Act provides an assistance for minimum statutory wages for scheduled employment
a. Payment of Wages Act, 1936
b. Minimum Wages Act, 1948
c. Factories Act, 1948
d. Payment of Gratuity act, 1972
………………………
3. Briefly explain the concept of Performance Appraisal.
4. Explain On-Job and Off Job Training.
END OF SECTION A
Examination Paper Semester I: Human Resource Management
IIBM Institute of Business Management
Section B: Case lets (40 marks)
•This section consists of Case lets.
•Answer all the questions.
•Each Case let carries 20 marks.
•Detailed information should form the part of your answer (Word limit 150-200 words).
Case let 1
Trust them with knee-jerk reactions," said Vikram Koshy, CEO, Delta Software India, as he looked at the
quarterly report of Top Line Securities, a well-known equity research firm. The firm had announced a
downgrade of Delta, a company listed both on Indian bourses and the NASDAQ. The reason? "One out
of every six development engineers in the company is likely to be benched during the remaining part of
the year." Three analysts from Top Line had spent some time at Delta three weeks ago. Koshy and his
team had explained how benching was no different from the problems of excess inventory, idle time, and
surplus capacity that firms in the manufacturing sector face on a regular basis, "Delta has witnessed a
…………………………..a mix of both.
Tie-ups with global majors will help. Now is the time to look beyond the US and strike alliances with
firms in Europe- and also Japan-as part of developing new products for global markets."
Questions
1. Should benching be a matter of concern at Delta?
2. What are the risks involved in moving from a project-centric mode to a mix of projects and
products?
Case let 2
The contexts in which human resources are managed in today's organizations are constantly, changing.
No longer do firms utilize one set of manufacturing processes, employ a homogeneous group of loyal
employees for long periods of time or develop one set way of structuring how work is done and
supervisory responsibility is assigned. Continuous changes in who organizations employ and what these
employees do require HR practices and systems that are well conceived and effectively implemented to
ensure high performance and continued success.
1. Automated technologies nowadays require more technically trained employees possessing multifarious
skills to repair, adjust or improve existing processes. The firms can't expect these employees (Gen X
employees, possessing superior technical knowledge and skills, whose attitudes and perceptions toward
work are significantly different from those of their predecessor organizations: like greater self control,
less interest in job security; no expectations of long term employment; greater participation urge in work
……………………..so as to prevent the flight
of talented employees
Question
1. Discuss that technological breakthrough has brought a radical changes in HRM.
Section C: Applied Theory (30 marks)
•This section consists of applied theory Questions.
•Answer all the questions.
•Each question carries 15 marks.
•Detailed information should form the part of your answer (Word limit 150-200 words).
1. Several types of interviews are commonly used depending on the nature & importance of the
position to be filled within an organization. Explain the different types of Interviews.
2. Explain the legal provisions regarding safety of workers.
S-1-191110
END OF SECTION B
END OF SECTION C
IIBM Institute of Business Management
IIBM Institute of Business Management
Semester-1 Examination Paper MM.100
Financial Management
Section A: Objective Type (30 marks)
•This section consists of multiple choice & Short Notes.
•Answer all the questions.
•Part One carries 1 mark each & Part two carries 5 marks each.
Part one:
Multiple choices:
1. The approach focused mainly on the financial problems of corporate enterprise
a. Ignored non-corporate enterprise
b. Ignored working capital financing
c. External approach
d. Ignored routine problems
2. These are those shares, which can be redeemed or repaid to the holders after a lapse of the
stipulated period
a. Cumulative preference shares
b. Non-cumulative preference shares
c. Redeemable preference shares
d. Perpetual shares
3. This type of risk arise from changes in environmental regulations, zoning requirements, fees,
licenses and most frequently taxes
a. Political risk
b. Domestic risk
c. International risk
d. Industry risk
4. It is the cost of capital that is expected to raise funds to finance a capital budget or investment
proposal
a. Future cost
b. Specific cost
c. Spot cost
d. Book cost
………………………..
3. What do you understand by ‘Loan Amortization’?
4. What is the Difference between NPV and IRR?
END OF SECTION A
Examination Paper Semester I: Financial Management
IIBM Institute of Business Management
Section B: Case lets (40 marks)
•This section consists of Case lets.
•Answer all the questions.
•Each Case let carries 20 marks.
•Detailed information should form the part of your answer (Word limit 150 to 200 words).
Case let 1
This case provides the opportunity to match financing alternatives with the needs of different companies.
It allows the reader to demonstrate a familiarity with different types of securities. George Thomas was
finishing some weekend reports on a Friday afternoon in the downtown office of Wishart and Associates,
……………………………..
situation. If he could determine which firm matched each recommendation, he could still call the firms by
6:00 P.M. and meet the original deadline. George decided to return to his office and match each firm with
the appropriate financing.
Question:
1. Which type of financing is appropriate to each firm?
2. What types of securities must be issued by a firm which is on the growing stage in order to meet
the financial requirements?
Case let 2
This case has been framed in order to test the skills in evaluating a credit request and reaching a correct
decision. Perluence International is large manufacturer of petroleum and rubber-based products used in a
variety of commercial applications in the fields of transportation, electronics, and heavy manufacturing.
In the northwestern United States, many of the Perluence products are marketed by a wholly-owned
subsidiary, Bajaj Electronics Company. Operating from a headquarters and warehouse facility in San
Antonio, Strand Electronics has 950 employees and handles a volume of $85 million in sales annually.
About $6 million of the sales represents items manufactured by Perluence. Gupta is the credit manager at
Bajaj electronics. He supervises five employees who handle credit application and collections on 4,600
accounts. The accounts range in size from $120 to $85,000. The firm sells on varied terms, with 2/10, net
30 mostly. Sales fluctuate seasonally and the average collection period tends to run 40 days. Bad-debt
losses are less than 0.6 per cent of sales. Gupta is evaluating a credit application from Booth Plastics, Inc.,
a wholesale supply dealer serving the oil industry. The company was founded in 1977 by Neck A. Booth
and has grown steadily since that time. Bajaj Electronics is not selling any products to Booth Plastics and
had no previous contact with Neck Booth. Bajaj Electronics purchased goods from Perluence
International under the same terms and conditions as Perluence used when it sold to independent
customers. Although Bajaj Electronics generally followed Perluence in setting its prices, the subsidiary
operated independently and could adjust price levels to meet its own marketing strategies. The Perluence's
cost-accounting department estimated a 24 per cent markup as the average for items sold to Pucca
…………………………………were very costly to
Bajaj Electronics. With these considerations in mind, Gupta began to review the credit application for
Booth Plastics.
Question:
1. How would you judge the potential profit of Bajaj Electronics on the first year of sales to Booth
Plastics and give your views to increase the profit.
2. Suggestion regarding Credit limit. Should it be approved or not, what should be the amount of
credit limit that electronics give to Booth Plastics.
Section C: Applied Theory (30 marks)
•This section consists of applied theory questions.
•Answer all the questions.
•Each question carries 15 marks each.
•Detailed information should form the part of your answer (Word limit 200-250 words).
1. Honey Well Company is contemplating to liberalize its collection effort. Its present sales are Rs.
10 lakh, its average collection period is 30 days, its expected variable cost to sales ratio is 85 per
cent and its bad debt ratio is 5 per cent. The Company’s cost of capital is 10 per cent and tax are
is 40 per cent. He proposed liberalization in collection effort increase sales to Rs. 12 lakh
increases average collection period by 15 days, and increases the bad debt ratio to 7 percent.
Determine the change in net profit.
2. Explain the concept of working capital. What are the factors which influence the working capital?
S-1-91110
END OF SECTION B
END OF SECTION C
Examination Paper Semester I: Human Resource Management
IIBM Institute of Business Management
IIBM Institute of Business Management
Semester-1 Examination Paper MM.100
Human Resource Management
Section A: Objective Type (30 marks)
•This section consists of multiple choice & Short Notes type questions.
•Answer all the questions.
•Part one carries 1 mark each & Part two carries 5 marks each.
Part One:
Multiple choices:
1. It is a cultural attitude marked by the tendency to regard one’s own culture as superior to others
a. Geocentrism
b. Polycentrism
c. Ethnocentrism
d. Egocentrism
2. It is the systemic study of job requirements & those factors that influence the performance of
those job requirements
a. Job analysis
b. Job rotation
c. Job circulation
d. Job description
3. This Act provides an assistance for minimum statutory wages for scheduled employment
a. Payment of Wages Act, 1936
b. Minimum Wages Act, 1948
c. Factories Act, 1948
d. Payment of Gratuity act, 1972
………………………
3. Briefly explain the concept of Performance Appraisal.
4. Explain On-Job and Off Job Training.
END OF SECTION A
Examination Paper Semester I: Human Resource Management
IIBM Institute of Business Management
Section B: Case lets (40 marks)
•This section consists of Case lets.
•Answer all the questions.
•Each Case let carries 20 marks.
•Detailed information should form the part of your answer (Word limit 150-200 words).
Case let 1
Trust them with knee-jerk reactions," said Vikram Koshy, CEO, Delta Software India, as he looked at the
quarterly report of Top Line Securities, a well-known equity research firm. The firm had announced a
downgrade of Delta, a company listed both on Indian bourses and the NASDAQ. The reason? "One out
of every six development engineers in the company is likely to be benched during the remaining part of
the year." Three analysts from Top Line had spent some time at Delta three weeks ago. Koshy and his
team had explained how benching was no different from the problems of excess inventory, idle time, and
surplus capacity that firms in the manufacturing sector face on a regular basis, "Delta has witnessed a
…………………………..a mix of both.
Tie-ups with global majors will help. Now is the time to look beyond the US and strike alliances with
firms in Europe- and also Japan-as part of developing new products for global markets."
Questions
1. Should benching be a matter of concern at Delta?
2. What are the risks involved in moving from a project-centric mode to a mix of projects and
products?
Case let 2
The contexts in which human resources are managed in today's organizations are constantly, changing.
No longer do firms utilize one set of manufacturing processes, employ a homogeneous group of loyal
employees for long periods of time or develop one set way of structuring how work is done and
supervisory responsibility is assigned. Continuous changes in who organizations employ and what these
employees do require HR practices and systems that are well conceived and effectively implemented to
ensure high performance and continued success.
1. Automated technologies nowadays require more technically trained employees possessing multifarious
skills to repair, adjust or improve existing processes. The firms can't expect these employees (Gen X
employees, possessing superior technical knowledge and skills, whose attitudes and perceptions toward
work are significantly different from those of their predecessor organizations: like greater self control,
less interest in job security; no expectations of long term employment; greater participation urge in work
……………………..so as to prevent the flight
of talented employees
Question
1. Discuss that technological breakthrough has brought a radical changes in HRM.
Section C: Applied Theory (30 marks)
•This section consists of applied theory Questions.
•Answer all the questions.
•Each question carries 15 marks.
•Detailed information should form the part of your answer (Word limit 150-200 words).
1. Several types of interviews are commonly used depending on the nature & importance of the
position to be filled within an organization. Explain the different types of Interviews.
2. Explain the legal provisions regarding safety of workers.
S-1-191110
END OF SECTION B
END OF SECTION C
No comments:
Post a Comment