Examination Paper of Safety Management
1 IIBM Institute of Business Management
IIBM Institute of Business Management
Examination Paper MM.100
Safety Management
Section A: Objective Type (30 marks)
• This section consists of multiple choice & Short Notes type questions.
• Answer all the questions.
• Part one carries 1 mark each & Part Two carries 5 marks each.
Part One
Multiple choices
1. In the 5’S to good housekeeping leading to cleaner, better & safety workplace, what is meant by SIESO?
a. Sort
b. Systematize
c. Sweep
d. Sanitize
2. When the car in front is about to turn the right than what step should be taken-
a. Overtake only on right
b. Overtaking on the left
c. Overtaking is not permissible
d. None of these
3. What is the full form of OSHA stands -
a. Organizational Safety and Health Administration
b. Organizational Security and Health Application
c. Occupational Safety and Health Administration
d. Occupational Safety and Health Advantage
4. Which of the following is not the visible cost of accident?
a. Loss of production
b. Medical cost
c. Legal cost
d. Overhead cost
5. BBS stands for_____________
6. PPE Stands for_________.
7. Which of the following is not come under the 5E’s for accident prevention?
a. Engineering
b. Enforcement
Examination Paper of Safety Management
2 IIBM Institute of Business Management
c. Executing
d. Enforcement
8. Spoiled work, loss of prestige, funeral expenses are comes under which type of cost-
a. Visible
b. Invisible
c. Both a & b
d. None of these
9. Which of the following is the basic element of safety organization??
a. Assignment of responsibility
b. An accident record systems
c. Maintenance of safe working condition
d. All of the above
10. What is the full form of ABC in safety?
a. Always better control
b. Always be careful
c. Attitude behavior culture
d. None of the above
Part Two:
1. What are the 5E’s for accident prevention?
2. Explain the advantages of training in safety?
3. List the basic prevention measures of industrial fire.
4. List the tips for road safety.
END OF SECTION A
Section B: Case lets (40 marks)
• This section consists of Case lets.
• Answer all the questions.
• Each Case let carries 20 marks.
• Detailed information should form the part of your answer (Word limit 150-200 words).
Case let 1
Examination Paper of Safety Management
3 IIBM Institute of Business Management
The following report appears in the records of accidents in a major manufacturing concern. A new plating machine has been installed and was being check out for proper operation. During this check it was fond that bearing on the caustic solution circulating pump were defective and had to be replaced. The pump was removed, repaired and was being reinstalled. An electrician was assigned to make the electrical connections on the same pump.
The electrician finished his part of the assignment except for checking the direction of shaft rotation. Since the plumber was out of the area the electrician asked the company representative supplying the equipment if the pump was ready to the tried out, and he stated that it was. The electrician walked to the end of the platter to start the motor and the plumber appeared on the scene at the same time. Shout to the electrician not to start the pump were too late because he had already turned the pump on. At this moment, hot caustic solution showered out of the pipe flange which had not yet been reassembled and tighten. The solution splashed onto the plumber, two engineers in the area and other plant engineering employee and the vendor representative. The plumber received burns requiring immediate hospitalization and will be out of work for about two months. One of the engineers requires subsequent hospitalization for eye burns and was off work for over a week, while the other three involved received only minor burns.
Questions
1. How could this “accident” have been avoided? How would you recommend preventing occurrence of a similar accident in the future?
Case let 2
The Gladwin Company, a manufacturer of glassware with 1,200 employees, has had the following injury record for the past three years. The earliest year is shown first. Injuries involving days away from work: 44, 53, 47. The past year, one worker suffered permanently disfiguring burns; another lost four fingers on his right hand. Severity, which the union calculated on the old Z16.1 basis, was 600; 1,100; and 1050.
The company employs a full time safety specialist and has a safety committee. There is a relatively strong union, part of a national organization.
The union and management are in the midst of somewhat bitter contract negotiations. The union representatives in the third say of argument have introduced a demand that the union be given equal authority with management in all aspects of safety. They maintain working conditions are not safe enough and that the union should be given authority to set minimum safety standards to stop production when these areas not complied with and to cooperate as an equal partner with the present safety committee in inspecting and determining fault and remedy.
Question
1. What do you think the management representative should do? Should this union demand be granted?
END OF SECTION B
Examination Paper of Safety Management
4 IIBM Institute of Business Management
Section C: Applied Theory (30 marks)
• This section consists of Applied Theory questions.
• Answer all the questions.
• Each question carries 15 marks.
• Detailed information should form the part of your answer (Word limit 200-250 words).
1. Explain the “Do’s” and “Don’ts” of electrical safety?
2. Define ‘Hazard’. Explain types of ‘Industrial hazard’?
END OF SECTION C
1 IIBM Institute of Business Management
IIBM Institute of Business Management
Examination Paper MM.100
Safety Management
Section A: Objective Type (30 marks)
• This section consists of multiple choice & Short Notes type questions.
• Answer all the questions.
• Part one carries 1 mark each & Part Two carries 5 marks each.
Part One
Multiple choices
1. In the 5’S to good housekeeping leading to cleaner, better & safety workplace, what is meant by SIESO?
a. Sort
b. Systematize
c. Sweep
d. Sanitize
2. When the car in front is about to turn the right than what step should be taken-
a. Overtake only on right
b. Overtaking on the left
c. Overtaking is not permissible
d. None of these
3. What is the full form of OSHA stands -
a. Organizational Safety and Health Administration
b. Organizational Security and Health Application
c. Occupational Safety and Health Administration
d. Occupational Safety and Health Advantage
4. Which of the following is not the visible cost of accident?
a. Loss of production
b. Medical cost
c. Legal cost
d. Overhead cost
5. BBS stands for_____________
6. PPE Stands for_________.
7. Which of the following is not come under the 5E’s for accident prevention?
a. Engineering
b. Enforcement
Examination Paper of Safety Management
2 IIBM Institute of Business Management
c. Executing
d. Enforcement
8. Spoiled work, loss of prestige, funeral expenses are comes under which type of cost-
a. Visible
b. Invisible
c. Both a & b
d. None of these
9. Which of the following is the basic element of safety organization??
a. Assignment of responsibility
b. An accident record systems
c. Maintenance of safe working condition
d. All of the above
10. What is the full form of ABC in safety?
a. Always better control
b. Always be careful
c. Attitude behavior culture
d. None of the above
Part Two:
1. What are the 5E’s for accident prevention?
2. Explain the advantages of training in safety?
3. List the basic prevention measures of industrial fire.
4. List the tips for road safety.
END OF SECTION A
Section B: Case lets (40 marks)
• This section consists of Case lets.
• Answer all the questions.
• Each Case let carries 20 marks.
• Detailed information should form the part of your answer (Word limit 150-200 words).
Case let 1
Examination Paper of Safety Management
3 IIBM Institute of Business Management
The following report appears in the records of accidents in a major manufacturing concern. A new plating machine has been installed and was being check out for proper operation. During this check it was fond that bearing on the caustic solution circulating pump were defective and had to be replaced. The pump was removed, repaired and was being reinstalled. An electrician was assigned to make the electrical connections on the same pump.
The electrician finished his part of the assignment except for checking the direction of shaft rotation. Since the plumber was out of the area the electrician asked the company representative supplying the equipment if the pump was ready to the tried out, and he stated that it was. The electrician walked to the end of the platter to start the motor and the plumber appeared on the scene at the same time. Shout to the electrician not to start the pump were too late because he had already turned the pump on. At this moment, hot caustic solution showered out of the pipe flange which had not yet been reassembled and tighten. The solution splashed onto the plumber, two engineers in the area and other plant engineering employee and the vendor representative. The plumber received burns requiring immediate hospitalization and will be out of work for about two months. One of the engineers requires subsequent hospitalization for eye burns and was off work for over a week, while the other three involved received only minor burns.
Questions
1. How could this “accident” have been avoided? How would you recommend preventing occurrence of a similar accident in the future?
Case let 2
The Gladwin Company, a manufacturer of glassware with 1,200 employees, has had the following injury record for the past three years. The earliest year is shown first. Injuries involving days away from work: 44, 53, 47. The past year, one worker suffered permanently disfiguring burns; another lost four fingers on his right hand. Severity, which the union calculated on the old Z16.1 basis, was 600; 1,100; and 1050.
The company employs a full time safety specialist and has a safety committee. There is a relatively strong union, part of a national organization.
The union and management are in the midst of somewhat bitter contract negotiations. The union representatives in the third say of argument have introduced a demand that the union be given equal authority with management in all aspects of safety. They maintain working conditions are not safe enough and that the union should be given authority to set minimum safety standards to stop production when these areas not complied with and to cooperate as an equal partner with the present safety committee in inspecting and determining fault and remedy.
Question
1. What do you think the management representative should do? Should this union demand be granted?
END OF SECTION B
Examination Paper of Safety Management
4 IIBM Institute of Business Management
Section C: Applied Theory (30 marks)
• This section consists of Applied Theory questions.
• Answer all the questions.
• Each question carries 15 marks.
• Detailed information should form the part of your answer (Word limit 200-250 words).
1. Explain the “Do’s” and “Don’ts” of electrical safety?
2. Define ‘Hazard’. Explain types of ‘Industrial hazard’?
END OF SECTION C
No comments:
Post a Comment