Examination Paper of Safety Management
1 IIBM Institute of Business Management
IIBM Institute of Business Management
Examination Paper MM.100
Safety Management
Section A: Objective Type (30 marks)
• This section consists of multiple choice & Short Notes type questions.
• Answer all the questions.
• Part one carries 1 mark each & Part Two carries 5 marks each.
Part One
Multiple choices
1. In the 5’S to good housekeeping leading to cleaner, better & safety workplace, what is meant by SIESO?
a. Sort
b. Systematize
c. Sweep
d. Sanitize
2. When the car in front is about to turn the right than what step should be taken-
a. Overtake only on right
b. Overtaking on the left
c. Overtaking is not permissible
d. None of these
3. What is the full form of OSHA stands -
a. Organizational Safety and Health Administration
b. Organizational Security and Health Application
c. Occupational Safety and Health Administration
d. Occupational Safety and Health Advantage
4. Which of the following is not the visible cost of accident?
a. Loss of production
b. Medical cost
c. Legal cost
d. Overhead cost
5. BBS stands for_____________
…………………….
2. Explain the advantages of training in safety?
3. List the basic prevention measures of industrial fire.
4. List the tips for road safety.
END OF SECTION A
Section B: Case lets (40 marks)
• This section consists of Case lets.
• Answer all the questions.
• Each Case let carries 20 marks.
• Detailed information should form the part of your answer (Word limit 150-200 words).
Case let 1
Examination Paper of Safety Management
3 IIBM Institute of Business Management
The following report appears in the records of accidents in a major manufacturing concern. A new plating machine has been installed and was being check out for proper operation. During this check it was fond that bearing on the caustic solution circulating pump were defective and had to be replaced. The pump was removed, repaired and was being reinstalled. An electrician was assigned to make the electrical connections on the same pump.
…………………………for about two months. One of the engineers requires subsequent hospitalization for eye burns and was off work for over a week, while the other three involved received only minor burns.
Questions
1. How could this “accident” have been avoided? How would you recommend preventing occurrence of a similar accident in the future?
Case let 2
The Gladwin Company, a manufacturer of glassware with 1,200 employees, has had the following injury record for the past three years. The earliest year is shown first. Injuries involving days away from work: 44, 53, 47. The past year, one worker suffered permanently disfiguring burns; another lost four fingers …………………………….
to cooperate as an equal partner with the present safety committee in inspecting and determining fault and remedy.
Question
1. What do you think the management representative should do? Should this union demand be granted?
END OF SECTION B
Examination Paper of Safety Management
4 IIBM Institute of Business Management
Section C: Applied Theory (30 marks)
• This section consists of Applied Theory questions.
• Answer all the questions.
• Each question carries 15 marks.
• Detailed information should form the part of your answer (Word limit 200-250 words).
1. Explain the “Do’s” and “Don’ts” of electrical safety?
2. Define ‘Hazard’. Explain types of ‘Industrial hazard’?
END OF SECTION C
1 IIBM Institute of Business Management
IIBM Institute of Business Management
Examination Paper MM.100
Safety Management
Section A: Objective Type (30 marks)
• This section consists of multiple choice & Short Notes type questions.
• Answer all the questions.
• Part one carries 1 mark each & Part Two carries 5 marks each.
Part One
Multiple choices
1. In the 5’S to good housekeeping leading to cleaner, better & safety workplace, what is meant by SIESO?
a. Sort
b. Systematize
c. Sweep
d. Sanitize
2. When the car in front is about to turn the right than what step should be taken-
a. Overtake only on right
b. Overtaking on the left
c. Overtaking is not permissible
d. None of these
3. What is the full form of OSHA stands -
a. Organizational Safety and Health Administration
b. Organizational Security and Health Application
c. Occupational Safety and Health Administration
d. Occupational Safety and Health Advantage
4. Which of the following is not the visible cost of accident?
a. Loss of production
b. Medical cost
c. Legal cost
d. Overhead cost
5. BBS stands for_____________
…………………….
2. Explain the advantages of training in safety?
3. List the basic prevention measures of industrial fire.
4. List the tips for road safety.
END OF SECTION A
Section B: Case lets (40 marks)
• This section consists of Case lets.
• Answer all the questions.
• Each Case let carries 20 marks.
• Detailed information should form the part of your answer (Word limit 150-200 words).
Case let 1
Examination Paper of Safety Management
3 IIBM Institute of Business Management
The following report appears in the records of accidents in a major manufacturing concern. A new plating machine has been installed and was being check out for proper operation. During this check it was fond that bearing on the caustic solution circulating pump were defective and had to be replaced. The pump was removed, repaired and was being reinstalled. An electrician was assigned to make the electrical connections on the same pump.
…………………………for about two months. One of the engineers requires subsequent hospitalization for eye burns and was off work for over a week, while the other three involved received only minor burns.
Questions
1. How could this “accident” have been avoided? How would you recommend preventing occurrence of a similar accident in the future?
Case let 2
The Gladwin Company, a manufacturer of glassware with 1,200 employees, has had the following injury record for the past three years. The earliest year is shown first. Injuries involving days away from work: 44, 53, 47. The past year, one worker suffered permanently disfiguring burns; another lost four fingers …………………………….
to cooperate as an equal partner with the present safety committee in inspecting and determining fault and remedy.
Question
1. What do you think the management representative should do? Should this union demand be granted?
END OF SECTION B
Examination Paper of Safety Management
4 IIBM Institute of Business Management
Section C: Applied Theory (30 marks)
• This section consists of Applied Theory questions.
• Answer all the questions.
• Each question carries 15 marks.
• Detailed information should form the part of your answer (Word limit 200-250 words).
1. Explain the “Do’s” and “Don’ts” of electrical safety?
2. Define ‘Hazard’. Explain types of ‘Industrial hazard’?
END OF SECTION C
No comments:
Post a Comment